Machinery and equipment
QProcess supplies cast, forged, machined and plastic components to machinery and equipment manufacturers, from machine tools and packaging machines to process equipment. Typical parts are machine bases, housings, shafts, gear blanks, guides and wear parts, from prototypes to series.
Request a quote
At a glance
Typical parts
- Machine bases, frames and beds
- Gearbox, pump and bearing housings
- Shafts, spindles and gear blanks
- Plates, brackets and mounting parts
- Hydraulic manifolds and blocks
- Guide rails, rollers and plastic wear parts
- Tool and fixture components
Inspection
- Full first article, often on CMM
- Flatness, position and roughness if specified
Documents
- Dimensional report
- EN 10204 3.1 certificate
Processes and materials
| Component | Process | Typical material |
|---|---|---|
| Machine bases and housings | sand casting and CNC milling | EN-GJL-250, EN-GJS-400-15 |
| Shafts and gear blanks | forging, CNC turning, CNC grinding | 42CrMo4, 16MnCr5 |
| Plates and brackets | laser cutting and CNC milling | S355J2, EN AW-6082 |
| Aluminium housings and covers | die casting, permanent mould casting | EN AC-AlSi9Cu3(Fe), EN AC-AlSi7Mg0.3 |
| Hydraulic blocks | CNC milling | EN-GJS-400-15, EN AW-6082 |
| Guides and wear parts | engineering plastics | POM-C, PE-UHMW |
Quality and documentation
Machinery parts are supplied with a dimensional report and a material certificate to EN 10204 3.1. First articles are measured in full, often on a coordinate measuring machine (CMM). Flatness, position tolerances and surface roughness are measured where the drawing specifies them. More on the quality page.
Related pages
- CNC machiningCNC turned, milled and ground parts, EDM, laser and waterjet cut parts from machine shops in Türkiye, from prototypes to series, with dimensional reports.
- CastingSand, die, permanent mould, investment, centrifugal and continuous castings in iron, steel, aluminium and bronze, produced by foundries in Türkiye.
- ForgingClosed-die and open-die steel forgings, rolled rings and shafts from forges in Türkiye, supplied raw, heat treated or machined, with EN 10204 3.1 certificates.
- Engineering plasticsMachined and injection moulded engineering plastic parts in PA6, PA66, PA6-GF30, POM-C, PE-UHMW and PEEK, produced by manufacturers in Türkiye.
- Secondary operationsHeat treatment, galvanising, powder coating, KTL e-coating, painting and assembly for cast, forged and machined parts, managed by QProcess in the same order.
- Other industriesCast, forged, machined and plastic parts for pumps and valves, hydraulics, rail, material handling, industrial automation, robotics and marine equipment.
Frequently asked questions
Can you supply both single parts and series?
Yes. Machinery builders often need a few parts per machine and steady repeat orders. CNC machining, sand casting and open-die forging suit small quantities; die casting and closed-die forging become economical in series.
Do you supply machined castings ready for assembly?
Yes. Castings and forgings are machined, heat treated and coated as required and delivered ready to install, with one set of documents.
Can you combine metal and plastic parts in one order?
Yes. Machined metal parts and engineering plastic parts such as guides, rollers and wear strips can be supplied in the same order.
Send your drawing. You get a quotation in 3 to 5 working days.
Your drawings are handled confidentially; NDA on request.